Technical approvals of Europe and USA
- Product features:
AN EXCELLENT 100% EPOXY BASED-ADHESIVE APPROVED FOR USING IN
DRY, WET, WATER-FLOODED AND DIAMOND CORED CONCRETE HOLE
- The epoxy resin and hardener compounded product branded VME Basic/585ml injection adhesive (made in Germany, certified by the approvals ETA of Europe and ICC of USA) are completely mixed when they are dispensed from the dual cartridge through a static mixing nozzle, directly into anchor drilled-hole.
- The VME can be used with threaded anchor rod to create chemical anchor bolt, or ribbed-bar to create bonded-in reinforcement bar (starter bar) in solid concrete and stone.
- The adhesive is quite smooth and helping easily to dispense it out of auto mixing nozzle, especially for overhead application on ceiling.
- Approved for applications in cracked and non-cracked concrete.
- Approved for fire rated resistant.
- Produced by 100% Epoxy based-adhesive, the VME Basic adhesive is the highest strength of chemical anchoring range, approved and allowed to resist static, wind or earthquake loads and wind-live-vibration loads; also work well for diamond cored hole with smooth hole side-wall and even in dry, wet or water-flooded hole.
- Better than other branded Epoxy adhesive product sagging down around anchor hole hoop-edge and being lack of adhesive, the VME Basic is quite clammy and safe.
- Advantages:
- Approved for resisting seismic action: Safety for dowelling post-installed rebar in R.C elements of ramp, car-parks at basement, ...
- Approvals/Listings: European technical approvals ETA-787, ETA-788 and ICC-ESR 2845 of USA.
- Fire rated up to 4 hrs.
- Use for both base materials: Concrete and natural stone.
- Maximum working time 8 min. (at ≥35°C of base material temperature): Give more time to adjust an anchor location, ...
- Fast curing time only 7h (at ≥35°C of base material temperature): To be fully cured for installation, faster than other equivalent epoxy based adhesives.
- Easier to install anchors in hot weather.
- Easier installation of larger diameter anchors and deeper embedment.
- Styrene free.
- Long self-life: 18 months.
- Packed in a big dual plastic cartridge of 585ml c/w a nozzle - save money.
- Easy to open, snap-off tip, no cutting required.
- Typical Applications:
- Fixing dowel-bars (starter bars) or threaded anchor rod into concrete or stones.
- Anchor bolt for fixing steel structures, canopy console, tower-crane, ...
- Tunnel, railing, strut/shoring fixings.
- Harbor/port piers and underwater fixings.
>>> For technical support and further inquiry you may have, please contact us
==> Site Applications
|
Related products
