AN EXCELLENT 100% EPOXY BASED-ADHESIVE APPROVED FOR USING IN DRY, WET, WATER-FLOODED AND DIAMOND CORED HOLES IN CONCRETE
The epoxy resin and hardener compounded product branded VME Basic/585ml injection adhesive (made in Germany by MKT, certified by the European Technical Approval - ETA) are completely mixed when they are dispensed from the dual cartridge through a static mixing nozzle, directly into anchor drilled-hole.
The VME can be used with threaded anchor rod to create chemical anchor bolt, or ribbed-bar to create bonded-in reinforcement bar (starter bar) in solid concrete and stone.
The adhesive is quite smooth and helping easily to dispense it out of auto mixing nozzle, especially for overhead application on ceiling.
Approved for applications in cracked and non-cracked concrete.
Approved for fire rated resistant.
Produced by 100% Epoxy based-adhesive, the VME Basic adhesive is the highest strength of chemical anchoring range, approved and allowed to resist static, wind or earthquake loads and wind-live-vibration loads; also work well for diamond cored hole with smooth hole side-wall and even in dry, wet or water-flooded hole.
Better than other branded epoxy adhesive product sagging down around anchor hole hoop-edge and being lack of adhesive, the VME Basic is quite clammy and safe.
- Advantages:
Approved for resisting seismic action: Safety for dowelling post-installed rebar in R.C elements of ramp, car-parks at basement, ...
Approvals/Listings: European technical approvals ETA-787 and ETA-788.
Fire rated up to 4 hrs.
Use for both base materials: Concrete and natural stone.
Maximum working time 8 min. (at ≥35°C of base material temperature): Give more time to adjust an anchor location, ...
Fast curing time only 7h (at ≥35°C of base material temperature): To be fully cured for installation, faster than other equivalent epoxy based adhesives.
Easier to install anchors in hot weather.
Easier installation of larger diameter anchors and deeper embedment.
Styrene free.
Long self-life: 18 months.
Packed in a big dual plastic cartridge of 585ml c/w a mixing nozzle - save money.
Easy to open, snap-off tip, no cutting required.
Opened cartridges can be reused with a new static mixer.
- Typical Applications:
Fixing starter bars or threaded anchor rods into concrete or natural stones.
Chemical anchor bolt for fixing steel structures, canopy console, tower-crane, ...
Tunnel, railing, strut/shoring fixings.
Harbor/port piers and underwater fixings.
>>> For technical support and further inquiry you may have, please contact us
Download:
